2007 Toyota Tundra 4.7 Secondary Air Injection Pump Location

Its the air pump that sits behind the air ln take cover Report.

2007 toyota tundra 4.7 secondary air injection pump location. The pumps are located in the worst possibly place in the right fender well where all the water dust and debris can get to them. If the relay is bad replace it with the same amperage rating relay as the original. Well every one said is the injection air pump and replace but the code is p2442 witsh is secondary injection pump solenoid stock open Bank2 so I test the pumps they work and I test the air tube is going to the solenoid and one wasnt hold pressure so was the bank2 the way to.

Genuine Toyota Part - 176000F010 17600-0F010. Note that some applications use more than one relay in the SAI system and that this. Sequoia 47L 2008-2009 SR-5LIMITED.

Report 2005 Toyota Tundra 145000 mi Visitor Nead buypass ket for part 17610c. Tundra 46L 2009-2012 SR-5LIMITED. It seems to have a sound motor no miss just no power.

An air pump is used on the vehicle to lower tail pipe emissions on start-up. Replacement for Toyota Tundra 40L 2008-2011 SR-5LIMITED. They pump clean air into the emissions sytem at cold start up.

Put out a code that said it was the air injection pump. Secondary Air Pump Smog Pump 40L V6 47L 57L V8 Replacement for Lexus LX570 2008-2013 Base 57L. OBD II fault code P0418 is a generic code that is defined as Secondary air injection pump relay A -circuit malfunction and is set when the PCM Powertrain Control Module detects a failure or malfunction in the SAI Secondary Air Injection circuit that is associated with the relay labelled A.

How to repair P0418 Toyota code Secondary Air Injection System Relay A Circuit Malfunction. The SDHQ Air Pump Intake Kit relocates the intake for the failure prone pump from the inner fender well to inside the engine compartment close to the engine intake where it is better protected from the elements up and out of harms way. I used to have the code for relay valve stuck open bank 2.