2001 Toyota Tundra Removing Upper Ball Joint

538591Replace the forcing screw in the C-frame with OTC No.

2001 toyota tundra removing upper ball joint. Especially designed for heavy-duty wear and tear these ball joints will handle the toughest work you can throw at them and. 3-lower strut mounting bolt. The 2001 Toyota Tundra has 2 NHTSA complaints for the suspensionfrontcontrol armupper ball joint at 152710 miles average.

Inner Tie Rod Removal and Installation Using a 24mm socket remove the Ball Joint nut. Now we need to separate the ball joint. The headache saved from trying to get the old ball joint out is worth the money.

OE Replacement Warranty. Remove the ball joint dust boot. 2-lower control arm frame bolts.

After that I took the big C-Clamp positioned it around the upper ball joint with the longer catch cup from the 4WD adapter set then I used a 27 mm socket on top in place of the supplied part from the press you may have to pull it out from the wheel well to get it positioned right. 1ST GEN TOYOTA TUNDRA 2000-2006. Discussion in 1st Gen Tundras 2000-2006 started by growit Mar 14 2019.

Front Driver or Passenger Side Upper Recommended Use. APS Compatible with Toyota Tundra 1999-2002 Main Upper Stainless Steel Black 8x6 Horizontal Billet Grille Insert T85483J 8199 VHT SP114 FlameProof Coating Flat Orange Paint Can - 11 oz. A ball with a threaded stud a socket and a rubber boot.

Assemble the ball joint press over the control arm as shown in Figure 3. Turn the forcing screw until the removing adapter meets. 2006 2x4 Tundra OEM torque specs needed.