2001 Toyota Tundra Grease Fittings

Lube job 1 Answer.

2001 toyota tundra grease fittings. I have 2001 Tundra 4WD. The front driveshaft can be a pain. Use a good Lithium grease or Synthetic if you want.

The Toyota Owners Manual and the Factory Service Manual both recommend an NLGI-2 moly grease for the double-cardan joints and an NLGI-2 lithium-based grease for the u-joints and slip yokes. Ideally you want to pack the bearings full without forcing any out. TOYOTA 2001 TUNDRA 47L V8 Drivetrain Universal Joint.

If I take it to a shop to be greased they are likely not to grease it because it is too difficult. Most vehicles past the mid 90s dont have zerk fittings anymore to lube. 2001 tundra repair manual correction for the headlight and taillight system body electrical 00400-rm809-u2.

Posted on Nov 12 2009. Toyota Tundra 2001 AC Line O-Ring Kit by Santech. How to Grease Joints with no grease fittingsIf you need to grease a ball joint or tie-rod end and it has no grease fitting there is a way to grease the no.

On any driveline U joint you want to pump. There are eight total zerks grease fittings and the grease to use is also listed on the diagram. Toyota should have grease fittings on the ball joints when.

To retorque propeller shaft per manual Manual states torque is 59 for front shaft and 52 for rear shaft. Engineered by the company with more than 50 years of steering hose manufacturing experience Edelmann power steering. The 2001 Toyota Tundra has 1 problems reported for ball joint came out of the socket.