2000 Toyota Tundra Keyless Remote Programming Instructions

Free DIY programming instructions including instructional video are included below in this article.

2000 toyota tundra keyless remote programming instructions. ECU is NOT attached to firewall. Programming a remote for the 2002 Tundra SR5 Access Cab RS3000 System. Im not tech savvy so was concerned about programming to car.

INSERT key into Ignition Do NOT turn and PULL the key out. With the key out of the ignition unlock and open drivers door all other doors must be closed 2. The security light see pic.

Instructions seemed clear but it still took me a few tries to get it. Insert the key into the ignition Do NOT Turn it and Pull key out. Steps 2 and 3 should be performed within 40 seconds.

2000-2002 Toyota Tundra 2-Button Dealer Installed Key Fob Remote FCC. Locate the ECU next to steering column and above the air duct for the feet. Above for 3 seconds.

Remove master key from ignition cylinder. I purchased a new one from the dealer and they told me they would have to drop the dash board to program my keyless remote FCC ID BAB You may want to check with a local automotive locksmith first. Enter Programming Mode Step 1.

Insert the key in the ignition and switch it to the ON position. Definitely a bargain compared to Dealers. I have a 2000 toyota tundra that the keyless remote went kaput.