04 Toyota Tundra Headlight Adjustment

But roughly there are two screws one for the side-to-side adjustment and one for up-and-down adjustment.

04 toyota tundra headlight adjustment. You adjust each headlight individually. By reading this article you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Determine if the headlights are aimed properly.

Take a Phillips screwdriver and turn the black screw - it adjusts the light vertically. Unplug the two harnesses that hook into the headlight if needed and it is ready to be removed the car. EVO Lighting LED Halo Kit for Headlights.

If you want to adjust them horizontaly the upper adjustment upper gear is located on the top of the light. Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly. Turn the low beams on.

I noticed your truck is 1st gen. The picture below is from early 2nd gen Tundra. They are on the very bottom corner of the back of the headlight.

Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly. Use the mark as a reference point for your headlights. You adjust each headlight individually.

Check for a screw behind the bulb. Turn it counter-clockwise to make the light go up and clockwise to adjust down. - back the truck away from the wall to a distance of 3 meters 984 feet from the wall surface to the headlights - turn on low beams - the low beams should hit the wall 209 mm 0823 in _below_ the line headlamp height based on designed 4.